The new Rollease/Volta Push 15 remote now gives you 15 individual channels, 5 dedicated group channels as well as a built in all channel(Zero). Setting up groups: Select the group channel you want to use (A-E)Press and hold the (-) + the stop button for 4 seconds. A...
The motor is not responding. Make sure the motor has power.Make sure the controller has a good battery and is installed correctly.Adjust the antenna on the motor.Make sure the distance from the remote to the shade is in range.Check the wiring.Reset and reprogram the...
Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (So you can start from the beginning), please follow the “Resetting to factory default” directions before...
The shade loses its limits after programming. Make sure to complete the programming sequence to set limits. The shade won’t work. Make sure the motor has power.Check the wiringIf the shade has been cycled repeatedly, the thermal overload protection may have kicked in....
Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (so you can start from the beginning) please follow the “Resetting to Factory Default” directions before...
