Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (so you can start from the beginning), please follow the “Resetting to factory default” directions before...
The shade loses its limits after programming. Make sure to complete the programming sequence to set limits. The shade won’t work. Make sure the motor has power.If using a battery wand, make sure the batteries are good and they are in the tube properly.Reset and...
Note: These instructions start as if the shade has never been programmed. If the shade has been previously programmed or needs to go back to factory default (so you can start from the beginning) please follow the “Resetting to Factory Default” directions before...
Adding a new control is easy. Start with the control that operates the shade. If using a multi-channel control, select the channel that operates the shade. Press and hold the program button on the back of the remote until the shade jogs. Then, move to the control to...
Whether you want to use a wall switch, an app, voice control or handheld remote, Somfy has a control option for you. You can use any combination of Somfy RTS controls. Mix and match remotes, wall switches, timers and sensors for up to 12 devices or channels per window...
Typically, Li-ion motors will last a year before needing a recharge. However, factors such as shade size, shade weight and usage all play a part in how long the motor will last before needing to be recharged.
Li-ion motors require 6 hours of charging to be fully charged.
Yes. Somfy RTS motors will work with Alexa, IFTTT and Google Home/Assistant via IFTTT. Voice control will require a Somfy MyLink device.
If you have RTS (Radio Technology Somfy) motors, you can integrate with the following third party systems: Savant, Crestron, Control4, Leviton, RTI, AMX, Wink, Samsung Smart Things, Elan, Vantage, Amazon Alexa, URC and Nexia. Additional components will be required.
Each battery wand requires 8 AA lithium batteries. To install the batteries, unscrew to cap and install the batteries as shown on the outside of the battery wand. Be sure you only use AA lithium batteries and do not combine old batteries with new.
