Note: This pertains to Rollease Acmeda Motors only. All motors that are programmed to the same remote, automatically respond to channel zero. For example, on channel zero, pressing the up button will move all blinds programmed to that remote up.
No. The battery is designed for the full life of the motor.
Note: This pertains to Rollease Acmeda Motors only. The battery in the motor needs recharging.
Generally speaking, 500 cycles(1up/down = a cycle) but that depends on shade size and weight.
Yes. The charger can be left plugged into the motor longer than a charging cycle requires. This makes the motor into a hardwired solution with a battery backup.
No. The motor/battery both have integrated overcharge protection circuits. This means that the battery will limit the charge it will accept if plugged in longer than necessary.
A red light comes on to indicate fast charging of the battery. After fast charge is done, the light turns green and the remaining 3 hour charge becomes a trickle charge, optimizing battery performance.
It takes approximately 6 hours to fully charge the battery on your shade.
No. The motor can be charged while installed. Simply plug in the charger to the connector at the motor head.
You can have unlimited motors on the same channel. However, shades must be in range.
